Bi-level heating

Bi-level heating
Bi-level heating

This setting allows you to direct air of different temperatures from the instrument panel and foot outlets. The air from the foot outlets is slightly warmer than from the instrument panel outlets.

1. Set the air inlet selection button to the OFF position.

2. Set the airflow control dial to the “position.” position.

3. Set the temperature control dial to the desired temperature level.

4. Set the fan speed control dial to the desired speed.

Setting the temperature control dial fully turned to the red area or blue area decreases the temperature difference between the air from the instrument panel outlets and the air from the foot outlets.

    See also:

    Vehicle placard
    The vehicle placard is affixed to the driver’s side B-pillar. Example: The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded veh ...

    Select lever/gear position indicator
    1) Upshift/downshift indicator (AT and CVT models) This indicator shows the position of the shift lever (MT models) or select lever (AT and CVT models). ...

    Behavior with key lock-in prevention function non-operational
    - If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door is locked. ...