Daytime running light system (if equipped)
The brightness of the illumination of the high beam headlights is reduced by the daytime running light system.
The light switch must always be turned to the “” position when it is dark outside.
The high beam headlights will automatically
illuminate at reduced brightness
when the engine has started, under the
following conditions:
- The select lever is in a position other
than the “P” position (AT models).
- The parking brake is fully released.
- The light switch is in the “OFF” or “” position.
NOTE
When the light switch is in the “”
position, the front side marker lights,
tail lights and license plate lights are
also illuminated.
See also:
Loading your vehicle
WARNING
Never allow passengers to ride on a folded rear seatback, in the trunk or in
the cargo area. Doing so may result in serious injury.
WARNING
● Never stack luggage or other cargo hi ...
Glossary of tire terminology
● Accessory weight
The combined weight (in excess of those standard items which may be replaced)
of automatic transmission, power steering, power brakes, power windows, power seats,
radio, ...
License plate light
1. Insert a finger into the right side of the license plate light cover, then press once to the left and pull out to remove the cover.
2. Turn the bulb socket counterclockwise and pull out the so ...