To turn off fuel consumption indicator display
The fuel consumption indicator display can be turned off.
To turn off this display, turn the ignition switch to the “LOCK” position and press the “+” button adjacent to the information display for approximately 5 seconds.
Then, the information display and the clock display will blink for 3 seconds to notify you that the fuel consumption display has been turned off.
To restore the indicator, once again press the “+” button for approximately 5 seconds.
NOTE
- The initial display setting of the fuel
consumption indicator of your vehicle
has been set to operational at the time
of shipment from the factory.
- The average fuel consumption is calculated even while the indicator is not displayed.
- Even if you turn off the fuel consumption indicator, the fuel consumption indicator will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement.
See also:
Refrigerant for your climate control system
Your air conditioner uses ozone friendly
refrigerant HFC134a. Therefore, the method
of adding, changing or checking the
refrigerant is different from the method for
CFC12 (freon). Consult your ...
Driving on snowy and icy roads
WARNING
Do not use the cruise control on slippery roads such as snowy or icy roads. This
may cause loss of vehicle control.
CAUTION
Avoid prolonged continuous driving in snowstorms. Snow will ent ...
Recommended spark plugs
Refer to “Electrical system” F12-8. ...