Odometer/Trip meter
Type A
1) Trip knob
Type B
1) Trip knob
This meter displays the odometer and two trip meters when the ignition switch is in the “ON” position.
If you press the trip knob when the ignition switch is in the “LOCK” or “Acc” position, the odometer/trip meter will light up. It is possible to switch the indications while the odometer/trip meter is lit up. If you do not press the trip knob within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.
The display can be switched as shown in the following illustrations by pressing the trip knob.
Type A:
*: or , and or cannot be displayed when the ignition switch is in the “ON” position.
Type B:
*: or cannot be displayed when the ignition switch is in the “ON” position.
See also:
Fuel octane rating
This octane rating is the average of the Research Octane and Motor Octane numbers and is commonly referred to as the Anti Knock Index (AKI).
Using a gasoline with a lower octane rating can cause pers ...
Tire pressure monitoring system (TPMS) (if equipped)
The tire pressure monitoring system provides the driver with a warning message
by sending a signal from a sensor that is installed in each wheel when tire pressure
is severely low. The tire pressu ...
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
- A2DP (Advanced Audio Distribution
Profile)
- AVRCP (Audio/Video Remote Control ...