Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to the vehicle and when any of their electric wires are cut. The alarm system causes the horn to sound and the turn signal lights to flash for a short time when the sensed impact is weak, but it warns of a strong impact or multiple impacts by sounding the horn and flashing the turn signal lights, both lasting approximately 30 seconds.
If you desire, your SUBARU dealer can connect them and set them for activation or deactivation.
NOTE
- The shock sensors are not always
able to sense impacts caused by breaking
in, and cannot sense an impact that
does not cause vibration (such as
breaking the glass using a rescue
hammer).
- The shock sensors may sense vibration as indicated in the following examples and trigger the alarm system.
Select the settings of the alarm system and shock sensors appropriately depending on where you usually park your vehicle.
Examples:
Vibration from a construction site
Vibration in a multistory car park
Vibration from trains
- You can have the sensitivity of the
shock sensors adjusted to your preference
by your SUBARU dealer.
See also:
Cup holders
Take care to avoid spills. Beverages, if hot, might burn you or your passengers. Spilled beverages may also damage upholstery, carpets or audio equipment. ...
To decrease the speed (by brake pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the “SET/COAST”
button once. Now the desired speed is set
and the veh ...
Using the cover
Using the cover
To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To
rewind it, unhook it from the catches and
it will re ...