Adjusting the front seat shoulder belt anchor height
Adjusting the front seat shoulder belt anchor height
The shoulder belt anchor height should be adjusted to the position best suited for the driver/front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck.
To raise:
Slide the anchor up.
To lower:
Pull the release knob and slide the anchor
down.
Pull down on the anchor to make sure that it is locked in place.
When wearing the seatbelts, make sure the shoulder portion of the webbing does not pass over your neck. If it does, adjust the seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision.
See also:
A/C – Air conditioner button
If the windshield starts to fog when the climate control system is operated in
the AUTO mode, press the air conditioner button “A/C” to defog and dehumidify. When
this button is pressed, the air ...
If the front passenger’s frontal airbag ON indicator illuminates and the OFF
indicator turns off even when an infant or a small child is in a child restraint
system (including booster seat)
Turn the ignition switch to the “LOCK” position if the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child rest ...
Screensaver (type D audio)
If the following operations are not performed
for more than 30 seconds while
the audio is ON, the screensaver will be
displayed.
- Operate any button or dial
- Shift the shift lever/select le ...