Vanity mirror light

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.


1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.

2. Pull the bulb out of the socket.


2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Reinstall the lens.

    See also:

    Recommended cold tire inflation pressure
    For the recommended cold tire inflation pressure for your vehicle’s tires, refer to “Tires” F12-8. ...

    Fuel gauge
    1) Low fuel warning light The fuel gauge shows the approximate amount of fuel remaining in the tank. When the ignition switch is in the “LOCK” or “Acc” position, the fuel gauge shows “E” even i ...

    Check the fluid level monthly.
    1. Drive the vehicle several miles to raise the temperature of the transmission fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal. 2. Park the vehicle on a level surface ...