Moonroof – if moonroof cannot be closed

If the moonroof cannot be closed with the moonroof switch, you can close the moonroof manually.

1. Take out the screwdriver from the tool bucket.

2. Open the overhead console. Refer to “Overhead console” F6-8.

3. Remove the two screws that retain the moonroof switch body. Then, remove the


3. Remove the two screws that retain the moonroof switch body. Then, remove the moonroof switch.

4. Insert the hex-head wrench in the end of the motor shaft.


4. Insert the hex-head wrench in the end of the motor shaft.

To lower the moonroof, turn the wrench clockwise.

To close the moonroof, turn the wrench counterclockwise.

Have your vehicle checked and repaired by an authorized SUBARU dealer.

    See also:

    Cruise control set indicator light
    The cruise control set indicator light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 3 seconds. The light illuminates when vehicle speed ha ...

    The Inside
    While it's possible to get fairly comfortable in many cars, it's not every day that you feel like everything is right in terms of your driving position, and that's how I felt in the Impreza 2.5GT. ...

    Breaking-in of new brake pads and linings
    When replacing the brake pad or lining, use only genuine SUBARU parts. After replacement, the new parts must be broken in as follows: ...