Maintenance tools

Your vehicle is equipped with the following maintenance tools.

● Jack
● Jack handle
● Screwdriver
● Towing hook (eye bolt) (if equipped) . Wheel nut wrench ● Electronic parking brake release tool

See also:

Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You can also ...

Map light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

Heating and defrosting
To direct warm air toward the floor and the windshield: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Set the temperature control dial to the most comfortabl ...