Parking tips

When parking your vehicle, always perform the following items.

● Apply the parking brake.

● For MT models, put the shift lever in the “1” (1st) for upgrade or “R” (Reverse) for a downgrade.

● For AT and CVT models, put the select lever in the “P” (Park) position. Never rely on the transmission alone to hold the vehicle.

When parking on a hill, always turn the steering wheel as described here. When


When parking on a hill, always turn the steering wheel as described here. When the vehicle is headed up the hill, the front wheels should be turned away from the curb.

When facing downhill, the front wheels should be turned into the curb.


When facing downhill, the front wheels should be turned into the curb.

    See also:

    Compass zone adjustment
    Compass calibration zones 1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for yo ...

    When “CHECK DISC” is displayed
    Press the eject button to unload the discs. Check that the disc is not damaged or scratched, and also check that the disc is inserted correctly. This message may appear when using some CD-RW discs ...

    When “PUSH EJECT” is displayed
    Press the eject button to unload the disc. Check the disc for damage or deformation, and also check that the correct disc is inserted. Do not try to unload the disc forcibly. Single CDs (i.e., 8 c ...