Shift lock release using the shift lock release button

Perform the following procedure to release the shift lock.

1. Apply the parking brake and stop the engine.

2. Remove the shift lock cover using a flat-head screwdriver.


2. Remove the shift lock cover using a flat-head screwdriver.

3. While depressing the brake pedal, insert the electronic parking brake release


3. While depressing the brake pedal, insert the electronic parking brake release tool into the hole, press the shift lock release button using the tool, and then move the select lever.

NOTE

To prevent damage to the shift lock cover, cover the tip of the flat-head screwdriver with vinyl tape or a cloth before removing the cover.

If the select lever does not move after performing the above procedure, the shift lock system may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.

    See also:

    D (Drive)
    This position is for normal driving. The transmission automatically shifts into a suitable gear according to the vehicle speed and the acceleration you require. When more acceleration is required ...

    Road surface freeze warning indication
    Road surface freeze warning indication 1) U.S.-spec. models 2) Except U.S.-spec. models When the outside temperature drops to 378F (38 C) or lower, the temperature indication flashes to ...

    Front seats
    WARNING ● Never adjust the seat while driving to avoid the possibility of loss of vehicle control and of personal injury. ● Before adjusting the seat, make sure the hands and feet of r ...