Auto-store
Using the Auto-store function, you can automatically store 6 stations on the current waveband by pressing the “A.S” button for more than 2 seconds. Use Autostore to quickly find the strongest stations, for example when traveling through different reception areas.
NOTE
● When you use Auto-store, the new stations replace any stations previously stored.
● Interrupting Auto-store: If you accidentally press the “A.S” (Auto-store) button, you can cancel the Auto-store function before it has been completed as follows.
– Switching to the other source – Switching to the other band – Press the “A.S” button – Press the “SCAN” button – Press the “SEEK” button – Press any of the preset buttons – Turn the “TUNE/TRACK/CH” dial – Turn off the audio system – Turn off the ignition switch
● When you use the Auto-store function while selecting the FM mode, even if you have selected the FM1 or FM2 station, the new stations are stored in the FM3 station.
● If it is only possible to receive less than 6 stations, the available stations are stored from preset 1 in order by frequency and the unused preset buttons are not registered to a station.
Also, the previously registered station memories of the unused preset buttons are cleared.
● If no stations can be received, the previously stored stations are not replaced.
● After pressing the “A.S” button, if more than 1 station is stored, the radio receives the station stored in preset 1.
● After pressing the “A.S” button, if no stations are stored, the radio receives the band and station that the radio received before pressing the button.
See also:
MODE button
Models without Hands-free system
Models with Hands-free system
The “MODE” button is used to select the
desired audio mode. Each time it is
pressed, the mode changes to the next
one in the ...
Vehicle Dynamics Control system monitor
Refer to “Vehicle Dynamics Control warning
light/Vehicle Dynamics Control operation
indicator light” and “Vehicle
Dynamics Control OFF indicator light”. ...
Cruise control indicator light
This light illuminates when the “CRUISE” main switch is pressed.
NOTE
• If you press the “CRUISE” main switch button while turning the ignition switch “ON”, the cruise control function is deactiva ...