Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated.
2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction.
3. Your can also calibrate the compass by driving your vehicle on your everyday routine. The compass will be calibrated once it has tracked a complete circle.
4. To recalibrate your compass, push and hold the compass display button for 9 seconds until a “C” appears in the compass window.
5. Calibrate the compass according to step 2 or step 3.
See also:
Brake pedal
Check the brake pedal free play and reserve distance according to the maintenance
schedule in the “Warranty and Maintenance Booklet”. ...
Meters and gauges
NOTE
Liquid crystal displays are used in some of the meters and gauges in the combination
meter. You will find their indications hard to see if you wear polarized glasses. ...
Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs.
1. Start the engine and turn the steering wheel fully in the opposite direction
of the bulb to be replaced.
2. Stop the eng ...