Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.
2. Press and hold the compass display button for 3 seconds until the zone selection comes up (a number will be displayed in the mirror compass window).
3. Press the compass display button repeatedly until the correct zone setting for your location is displayed.
4. Releasing the button for 5 seconds will exit the zone setting mode.
See also:
SI-DRIVE (STI)
SI-DRIVE (SUBARU Intelligent Drive) works to maximize engine performance, control and efficiency.
This system consists of three modes:
Intelligent (I), Sport (S), and Sport Sharp (S#). By adjusting ...
XMTM satellite radio reception tips for antenna on the windshield (for
U.S.A. only — if equipped)
For some models, the satellite radio
antenna is fixed to the upper right hand
corner of the windshield.
The XMTM satellite radio receiver that is
fitted to your vehicle receives the necessary ...
Air filtration system
Replace the filter element according to the replacement schedule as follows. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditions, the fi ...