AT OIL TEMP warning light (AT and CVT models)

The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.

See also:

Upshift/downshift indicator (AT and CVT models)
When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. Refer to “Automatic transmission/Continuously ...

HomeLink® Wireless Control System
The HomeLink® Wireless Control System can be used to activate remote control devices such as gate operators, garage door openers, door locks, home lighting and security systems. There are three H ...

Symmetrical All-Wheel Drive A Key To Brand Identity
Subaru offers three different Symmetrical All-Wheel Drive systems in the 2010 Subaru Legacy line, each tailored to the engine and type of transmission. In Legacy 2.5i models equipped with the 6-sp ...