Coolant temperature low indicator light/Coolant temperature high warning light

CAUTION

● After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves under any of the following conditions, the electrical system may be malfunctioning. Contact your SUBARU dealer immediately for an inspection.

– It remains blinking in RED.

– It remains illuminated in RED for more than 2 seconds.

– It remains blinking in RED and BLUE alternately.

● While driving, if this indicator light/warning light behaves under any of the following conditions, take the specified appropriate measure listed below.

– Blinking in RED:

Decelerate the vehicle. After the blinking RED light turns off, you can drive the vehicle normally.

– Illuminated in RED:

Safely stop the vehicle as soon as possible, and refer to the emergency steps for the case of engine overheating. After that, have the system checked by your nearest SUBARU dealer. Refer to “Engine overheating” F9-12.

– Blinking in RED and BLUE alternately:

The electrical system may be malfunctioning. Contact your SUBARU dealer for an inspection.

This coolant temperature low indicator light/coolant temperature high warning light has the following three functions.

● Illumination in BLUE indicates insufficient warming up of the engine ● Blinking in RED indicates that the engine is close to overheating ● Illumination in RED indicates overheating condition of the engine

For the system check, this indicator light/ warning light illuminates in RED for approximately 2 seconds when the ignition switch is turned to the “ON” position. After that, this indicator light/warning light changes to BLUE and maintains illumination in BLUE. This BLUE illuminated light turns off when the engine is warmed up sufficiently.

If the engine coolant temperature increases over the specified range, the indicator light/warning light blinks in RED. At this time, decelerate the vehicle. After the blinking RED light turns off, you can drive the vehicle normally. However, if the indicator light/warning light often blinks in RED, the electrical system may be malfunctioning. Contact your SUBARU dealer for an inspection.

If the engine coolant temperature increases further, the indicator light/warning light illuminates in RED continuously. At this time, the engine may be overheating. Safely stop the vehicle as soon as possible, and refer to the emergency steps for the case of engine overheating. Refer to “Engine overheating” F9-12. After that, have the system checked by your nearest SUBARU dealer.

NOTE

If the engine is restarted after a certain driving condition, this indicator light/ warning light may illuminate in RED. However, this is not a malfunction if the indicator light/warning

    See also:

    Passenger’s frontal airbag ON and OFF indicators
    Refer to “Front passenger’s frontal airbag ON and OFF indicators”. ...

    Towing
    WARNING Never tow AWD vehicles (including AT, MT and CVT) with the front wheels raised off the ground while the rear wheels are on the ground, or with the rear wheels raised off the ground while ...

    Modification of your vehicle
    Your vehicle should not be modified other than with genuine SUBARU parts and accessories. Other types of modifications could affect its performance, safety or durability, and may even vi ...