START

CAUTION

Do not turn the ignition switch to the “START” position while the engine is running.

The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.

If the engine does not start with your registered key, pull out the key once (at this time, the security indicator light will blink), wait for at least 10 seconds, reinsert the key in the ignition switch and then try to start the engine again.

NOTE

The engine may not start in the following cases:

● The key grip is touching another key or a metallic key holder.


● The key grip is touching another key or a metallic key holder.

● The key is near another key that contains an immobilizer transponder.


● The key is near another key that contains an immobilizer transponder.

● The key is near or touching another transmitter.

    See also:

    Interior
    While the exterior brings the Legacy cruising into 2010, the interior has me a little worried. It's a nice interior, but the seat upholstery's pattern, which looks like small flames, reminds me of ...

    2010 Subaru Impreza review
    Even though the Impreza sedan and hatchback were redesigned last year, Subaru is still working on improving its compact car. For 2009, there's a new 2.5GT trim level of the Impreza, and it uses th ...

    Towing and tie-down hooks
    The towing hooks should be used only in an emergency (e.g., to free a stuck vehicle from mud, sand or snow). - Use only the specified towing hook and tie-down hook. Never use suspension p ...