Selecting audible signal operation

Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. If desired, you may turn the audible signal off.

To deactivate the audible signal, perform the following procedure. You can also use the same steps to restore the function.

1. Sit in the drivers seat and shut all doors and the rear gate.

2. Press the unlock side of the power door locking switch.

3. Insert the key into the ignition switch.

4. While holding down the unlock side of the power door locking switch, pull the key out and re-insert it into the ignition switch at least 5 times within 10 seconds after performing step 2.

5. Open and close the drivers door within 10 seconds after performing step 4.

6. To indicate completion of the setting, the turn signal lights flash 3 times and the chirp sounds 3 times.

You may have the above procedure performed by your SUBARU dealer.

    See also:

    Outside temperature indicator
    1) U.S.-spec. models 2) Except U.S.-spec. models The outside temperature indicator shows the outside temperature in a range from −22 to 1228F (−30 to 508C). The indicator can give a ...

    Vehicle symbols
    There are some of the symbols you may see on your vehicle. For warning and indicator lights, refer to Warning and indicator lights. ...

    XMTM satellite radio (for U.S.A. only)
    XMTM is a continental U.S. based satellite radio service, including music, news, sports, talk and childrens programming. XMTM provides digital quality audio and text information, including song t ...