Security ID plate
1) Key number plate
2) Security ID plate
The security ID is stamped on the security ID plate attached to the key set. Write down the security ID and keep it in another safe place, not in the vehicle. This number is needed to make a replacement key if you lose your key or lock it inside the vehicle.
To make replacement keys, the key number is also needed. Refer to “Key replacement” F2-4.
The security ID is also needed for replacement or repair of the engine control unit, integrated unit, combination meter (all models) and security control unit (Canada-spec. models).
See also:
Type A
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to rem ...
Construction type
Applicable construction of this tire.
For example, “TUBELESS STEEL BELTED RADIAL” ...
Inspection
Perform the following steps at least twice a year to check the release handle
for correct operation.
1. Open the trunk lid.
2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...