See also:

License plate light
1. Insert a finger into the right side of the license plate light cover, then press once to the left and pull out to remove the cover. 2. Turn the bulb socket counterclockwise and pull out the so ...

Trunk light
1. Remove the cover by squeezing its sides and pulling it. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

Seat heater (if equipped)
1) HIGH – Rapid heating 2) LOW – Normal heating 3) OFF – Off A) Left-hand side B) Right-hand side The seat heater operates when the ignition switch is either in the “Acc” or “ON” position. T ...