Reclining the seatback (Outback)

WARNING


WARNING

To prevent the passenger from sliding under the seatbelt in the event of a collision, always put the seatback in the upright position while the vehicle is in motion.

CAUTION

If the vehicle is equipped with a cargo area cover, observe the following precautions.

● Be careful not to pinch your hand between the headrest and the cargo area cover when you recline the rear seat.

● Move the front cover of the cargo area cover backward so that the cover is not damaged by the reclined seatback. Refer to “Cargo area cover” F6-15.

Pull the lever and adjust the seatback to the desired position.


Pull the lever and adjust the seatback to the desired position.

Then release the lever and make sure the seatback is securely locked into place.

    See also:

    Behavior with key lock-in prevention function operational
    With the driver’s door open, the doors are automatically kept unlocked even if the front side of the power door locking switch is pressed. ...

    Shift lock release
    If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the select lever button pressed and brake pedal depre ...

    Refrigerant for your climate control system
    Your air conditioner uses ozone friendly refrigerant HFC134a. Therefore, the method of adding, changing or checking the refrigerant is different from the method for CFC12 (freon). Consult your SUB ...