See also:

Initializing the registered data
To initialize the registered data, perform the following procedure. 1. Select the “SETUP” menu. 2. Select the “SYSTEM SETUP” menu. 3. Select “INITIALIZE” by operating the “TUNE/TRACK/CH” dial. 4. ...

Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic transmission, check to see that the fluid level is between the lower level and upper level on the “COLD” range. If it is be ...

Brake booster
The brake booster uses engine manifold vacuum to assist braking force. Do not turn off the engine while driving because that will turn off the brake booster, resulting in poor braking power. The ...