Subaru Outback (BR): Vanity mirror light
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Replacing bulbs / Vanity mirror light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
READ NEXT:
Door step light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
Cargo area light (Outback) bulb replacing
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
Other bulbs
Other bulbs may be difficult to replace. We recommend that you have the bulbs
replaced by your SUBARU dealer if necessary.
SEE MORE:
Replacement of wiper blades
Grease, wax, insects, or other materials on the windshield or the wiper blade
results in jerky wiper operation and streaking on the glass. If you cannot remove
the streaks after operating the windshield washer or if the wiper operation is jerky,
clean the outer surface of the windshield (or re
DTC U0073, U0101, U0122, U0140, U0402, U0416, U0422
EK:DTC U0073 CAN FAILURE, BUS 'OFF' DETECTION
1. OUTLINE OF DIAGNOSIS
Detect malfunction of CAN communication.
Judge as NG when CAN communication failure has occurred.
2. COMPONENT DESCRIPTION
(Common Specifications)
CAN Protocol 2.0 B (Active)
Frame Format: 11 Bit ID Frame (Standard Frame)
Conform
© 2010-2024 Copyright www.suoutback.com
