Subaru Outback (BR): Front position light
1. Turn the socket counterclockwise and pull it out.
2. Pull out the bulb from the socket and replace the bulb with a new one.
READ NEXT:
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs
replaced by your SUBARU dealer if necessary.
1. Pull off the fender lining. Refer to “Pulling off the fender l
Legacy
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs
replaced by your SUBARU dealer if necessary.
1. Turn the knobs of the cover 90 degrees counterclockwis
1. Apply a flat-head screwdriver to the light cover as shown in the illustration,
and pry the light cover off from the rear gate trim.
1) Back-up light
2) Tail light
2. Turn the bulb socket c
SEE MORE:
1) Head restraint 2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while pressing the release button on the top of the seatback.
To remove:
While pressing the release button, pull out the head restraint.
To install:
Install the head re
General Description
A: COMPONENT
Air intake duct
Clip
Resonator chamber
Air cleaner case (front)
Spacer
Cushion
Air cleaner element
Air cleaner case (rear)
Clip
Clamp
Cover
Clip
Air intake boot ASSY
Clamp
Cushion
Mass air flow and intake air temperature
sensor
Blow-by hose
Clip
© 2010-2024 Copyright www.suoutback.com