Subaru Outback (BR): To decrease the speed (by the “RES/SET” switch)
Press the “RES/SET” switch to the “SET” side and hold it until the vehicle reaches
the desired speed. Then, release the switch. The vehicle speed at that moment will
be memorized and treated as the new set speed.
U.S.-spec. models
When the difference between the actual vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can be lowered 1 mph (1.6 km/h) each time by
pressing the “RES/SET” switch to the “SET” side quickly.
Canada-spec. models
When the difference between the actual vehicle speed and the set speed is less
than 4.4 km/h, the set speed can be lowered 1 km/h each time by pressing the “RES/SET”
switch to the “SET” side quickly.
READ NEXT:
1. Depress the brake pedal to release cruise control temporarily.
2. When the speed decreases to the desired speed, press the “RES/SET” switch
to the “SET” side once. Now the desired speed
The cruise control indicator light illuminates when the ignition switch is turned
to the “ON” position and turns off after approximately 3 seconds.
The light illuminates when the “CRUISE”
The indicator light for cruise control activation illuminates upon turning the ignition switch to the “ON” position and remains lit for around 3 seconds.
This light becomes illuminated
SEE MORE:
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the cover (A) and clip (B) from air intake
boot assembly.
3) Loosen the clamp (A) which connects the air intake
boot assembly and air cleaner case.
4) Loosen the clamp (B) which connects the air intake
boot assembly and throttle bo
1) Integrated crossbars
CAUTION
● For cargo carrying purposes, the bars must be used as crossbars and be used
together with the genuine SUBARU carrying attachment. The bars must never be used
alone to carry cargo. Otherwise, damage to the roof or paint or a dangerous road
hazard due
© 2010-2024 Copyright www.suoutback.com