Subaru Outback manuals

Subaru Outback (BR): Manual tuning

Turn the “TUNE/TRACK/CH” dial clockwise to increase the tuning frequency and


Turn the “TUNE/TRACK/CH” dial clockwise to increase the tuning frequency and turn the “TUNE/TRACK/CH” dial counterclockwise to decrease it.

Each time the dial is turned, the frequency interval can be changed between 10 kHz in the AM mode and 0.2 MHz in the FM mode.

READ NEXT:

 Seek tuning (SEEK)

If you press the “” or “” side of the “SEEK” button briefly, the radio will automatically search for a receivable station and stop at the first one it finds. This function may not be

 Scan tuning (SCAN)

If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for

SEE MORE:

 Front Door

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the front door trim. <Ref. to EI-60, FRONT DOOR, REMOVAL, Door Trim.> 3) Remove the outer mirror assembly. <Ref. to GW-28, REMOVAL, Outer Mirror Assembly.> 4) Remove the front door speaker assembly. Remove the screws

 Airbag Connector, Diagnostic Trouble Code

A: PROCEDURE For operation procedures, refer to "Airbag Connector" of Airbag System. <Ref. to AB-18, Airbag Connector.> Airbag Control Module I/O Signal A: ELECTRICAL SPECIFICATION Type A Terminal numbers in airbag control module connector are shown in the fig

© 2010-2024 Copyright www.suoutback.com