Subaru Outback manuals

Subaru Outback (BR): Fan speed control dial

The fan operates only when the ignition switch is turned to the “ON” position.


The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds.

READ NEXT:

 Temperature control dial

This dial regulates the temperature of airflow from the air outlets over a range from the blue side (cool) to red side (warm).

 Airflow control buttons

Each airflow control button activates the following air outlets. : Instrument panel outlets : Instrument panel outlets and foot outlets : Foot outlets, both side outlets of the instrument p

 Air conditioner button

The air conditioner operates only when the engine is running. Press the air conditioner button while the fan is in operation to turn on the air conditioner. The indicator light will illuminate.

SEE MORE:

 Throttle Body

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the cover (A) and clip (B) from air intake boot assembly. 3) Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case. 4) Loosen the clamp (B) which connects the air intake boot assembly and throttle bo

 DTC P0171, P0172, P0181, P0182, P0183, P0196, P0197, P0198, P0201, P0202, P0203, P0204, P0222, P0223, P0301, P0302, P0303, P0304

AR:DTC P0171 SYSTEM TOO LEAN (BANK 1) 1. OUTLINE OF DIAGNOSIS Detect fuel system malfunction by the amount of main feedback control. Diagnostic method Fuel system is diagnosed by comparing the target air fuel ratio calculated by ECM with the actual air fuel ratio measured by sensor. 2. ENABLE CONDI

© 2010-2024 Copyright www.suoutback.com