Subaru Outback (BR): Type B inside mirror (if equipped)
Subaru Outback (BR) 2010-2015 Owners Manual / Instruments and controls / Mirrors / Type B inside mirror (if equipped)
1) Electronic compass display
2) Rear view image display
3) HomeLink® button 1
4) HomeLink® button 2
5) Function indicator
6) HomeLink® button 3
7) Photosensor
8) Power button
9) Compass button
The mirror has the following features.
● Auto-dimming function for anti-glare capability ● Rear view image display ● Electronic compass display ● HomeLink® Wireless Control System
Using the power button and compass button, you can display the various functions of the rear view image display and the electronic compass display based on how long you press the buttons.
Power button
*: The setting returns to “ON” as a default setting every time the ignition switch is turned to the “OFF” position.
Compass button
- Auto-dimming function
- Rear view image display
- Electronic compass display
- HomeLink® Wireless Control System
READ NEXT:
Auto-dimming function
The auto-dimming function is an anti-glare capability which automatically reduces
glare coming from headlights of vehicles behind you.
By pressing the power button, the autodimming function is togg
Rear view image display
When the ignition switch is in the “ON” position and the transmission is in the
“R” (reverse) position, the rear view camera automatically displays the rear view
image behind the vehicle o
Electronic compass display
By briefly pressing the compass button, the compass display is toggled on or
off. When the compass display is on, an illuminated compass reading will appear
on the mirror.
Using the electronic co
SEE MORE:
How to use Subaru Select Monitor, data, modes
A: OPERATION
1. HOW TO USE SUBARU SELECT MONITOR
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
If communication is not possible between the electronic parking brake control module and the Subaru Select Monitor, check the
Steering Wheel
A: REMOVAL
1) Disconnect the negative terminal from the battery, and wait for 60 seconds
or more.
2) Set the tire to the straight-ahead position.
3) Remove the driver's airbag module assembly.
Push in the snap pin using a hexagon wrench or equivalent wrapped with a
protective tape to disengag
© 2010-2024 Copyright www.suoutback.com
