Subaru Outback: Parking brake warning
The light illuminates with the parking brake applied while the
ignition switch is in the “ON” position. It turns off when the parking brake is
released.
READ NEXT:
This light illuminates when the brake fluid level has dropped
to near the “MIN” level of the brake fluid reservoir with the ignition switch in
the “ON” position and with the parking brake
The brake system warning light also illuminates if a malfunction
occurs in the EBD system. In that event, it illuminates together with the ABS warning
light. The EBD system may be malfunctioning i
The brake system warning light flashes when the electronic parking
brake system is malfunctioning. If the warning light flashes, promptly park in a
safe location as soon as possible and contact yo
SEE MORE:
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake boot.
H4 model: <Ref. to IN(H4DOTC)-10, REMOVAL, Air Intake Boot.>
H6 model: <Ref. to IN(H6DO)-7, REMOVAL, Air Intake Boot.>
3) Remove the VDC control module & hydraulic control unit (VDCCM&H/U)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the generator. <Ref. to SC(H4SO)-18,
REMOVAL, Generator.>
3) Disconnect the terminal from oil pressure switch.
4) Remove the oil pressure switch.
B: INSTALLATION
1) Apply liquid gasket to the oil pressure switch
threads.
Li
© 2010-2024 Copyright www.suoutback.com