Subaru Outback manuals

Subaru Outback (BR): Conditions in which front passenger’s SRS frontal airbag is not activated

The front passenger’s SRS frontal airbag will not be activated when any of the following conditions are met regarding the front passenger’s seat:

● The seat is empty.

● The seat is equipped with a rearward facing child restraint system and an infant is restrained with it. (See WARNING that follows.) ● The seat is equipped with a forward facing child restraint system and a small child is restrained with it. (See WARNING that follows.) ● The seat is equipped with a booster seat and a small child is in the booster seat. (See WARNING that follows.) ● The seat is relieved of the occupant load for a time exceeding the predetermined monitoring time period.

● The seat is occupied by a child who has outgrown a child restraint system (See WARNING that follows.) or by a small adult.

● The front passenger’s occupant detection system is malfunctioning.

WARNING

NEVER INSTALL A REARWARD FACING CHILD SEAT IN THE FRONT PASSENGER’S SEAT EVEN IF THE FRONT PASSENGER’S SRS FRONTAL AIRBAG IS DEACTIVATED. Be sure to install it in the REAR seat in a correct manner. Also, it is strongly recommended that any forward facing child seat or booster seat be installed in the REAR seat, and that even children who have outgrown a child restraint system be also seated in the REAR seat. This is because children sitting in the front passenger’s seat may be killed or severely injured should the front passenger’s SRS frontal airbag deploy. REAR seats are the safest place for children.

When the front passenger’s seat is occupied by a child, observe the following precautions. Failure to do so may increase the load on the front passenger’s seat, activating the front passenger’s SRS frontal airbag even though that seat is occupied by a child.

● Do not place any article on the seat other than the child occupant and a child restraint system.

● Do not place more than one child on the seat.

● Do not install any accessory such as a table or TV onto the seatback.

● Do not store a heavy load in the seatback pocket.

● Do not allow the rear seat occupant to place his/her hands or legs on the front passenger’s seatback, or allow him/her to pull the seatback.

If the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child restraint system (including booster seat)

Turn the ignition switch to the “LOCK” position if the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child restraint system (including booster seat). Remove the child restraint system from the seat. By referring to the child restraint manufacturer’s recommendations as well as the child restraint system installation procedures in “Child restraint systems” F1-25, correctly install the child restraint system. Turn the ignition switch to the “ON” position and make sure that the front passenger’s frontal airbag ON indicator turns off and the OFF indicator illuminates. If still the ON indicator remains illuminated while the OFF indicator turns off, take the following actions.

● Ensure that no article is placed on the seat other than the child restraint system and the child occupant.

● Ensure that there is no article left in the seatback pocket.

● Ensure that the backward-forward position and seatback of front passenger’s seat are locked into place securely by moving the seat back and forth. (Models equipped with manual seats only)

If the ON indicator still remains illuminated while the OFF indicator turns off after taking relevant corrective actions described above, relocate the child restraint system to the rear seat and immediately contact your SUBARU dealer for an inspection.

NOTE

When a child who has outgrown a child restraint system or a small adult is seated in the front passenger’s seat, the SUBARU advanced frontal airbag system may or may not activate the front passenger’s SRS frontal airbag depending on the occupant’s seating posture. If the front passenger’s SRS frontal airbag is activated (the ON indicator remains illuminated while the OFF indicator turns off), take the following actions.

● Ensure that no article is placed on the seat other than the occupant.

● Ensure that there is no article left in the seatback pocket.

If the ON indicator still remains illuminated while the OFF indicator turns off despite the fact that the actions noted above have been taken, seat the child/ small adult in the rear seat and immediately contact your SUBARU dealer for an inspection. Even if the system has passed the dealer inspection, it is recommended that on subsequent trips the child/small adult always take the rear seat.

Children who have outgrown a child restraint system should always wear the seatbelt irrespective of whether the airbag is deactivated or activated.

READ NEXT:

 Conditions in which front passenger’s SRS frontal airbag is activated

The front passenger’s SRS frontal airbag will be activated for deployment upon impact when any of the following conditions is met regarding the front passenger’s seat. ● When the seat i

 Effect vehicle modifications made for persons with disabilities may have on SUBARU advanced frontal airbag system operation (U.S. only)

Changing or moving any parts of the front seats, seat belts, front bumper, front side frame, instrument panel, combination meter, steering wheel, steering column, tire, suspension or floor panel c

 Frontal airbag system operation

  1) Driver’s side 2) Passenger’s side The SRS airbag can function only when the ignition switch is in the “ON” position. The SUBARU advanced frontal airbag system i

SEE MORE:

 MT Gear Shift Cable

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Lift up the vehicle. 3) Remove the center exhaust pipe and rear exhaust pipe. (non-turbo model) <Ref. to EX(H4SO)-8, REMOVAL, Center Exhaust Pipe.> <Ref. to EX(H4SO)-9, REMOVAL, Rear Exhaust Pipe.> 4) Remove the center exhaus

 Extension Case

A: REMOVAL 1) Remove the transmission assembly. <Ref. to 5AT-37, REMOVAL, Automatic Transmission Assembly.> 2) Disconnect the rear vehicle speed sensor connector. 3) Remove the rear vehicle speed sensor. 4) Remove the extension case. B: INSTALLATION 1) Attach the selected reduction driven

© 2010-2024 Copyright www.suoutback.com