Subaru Outback (BR): Seatbelt maintenance
To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye
the belts because this could seriously affect their strength.
Inspect the seatbelts and attachments including the webbing and all hardware
periodically for cracks, cuts, gashes, tears, damage, loose bolts or worn areas.
Replace the seatbelts even if only minor damage is found.
CAUTION
● Keep the belts free of polishes, oils, chemicals and particularly battery acid.
● Never attempt to make modifications or changes that will prevent the seatbelt
from operating properly.
READ NEXT:
The driver’s and front passenger’s seatbelts have a seatbelt pretensioner. The
seatbelt pretensioners are designed to be activated in the event of an accident
involving a moderate to severe
SRS airbag system warning light
A diagnostic system continually monitors the readiness of the seatbelt pretensioner
while the vehicle is being driven. The seatbelt pretensioners share the control
WARNING
● When discarding a seatbelt retractor assembly or scrapping the entire vehicle
damaged by a collision, consult your SUBARU dealer.
● Tampering with or disconnecting the system
SEE MORE:
CAUTION
Do not use the bars as roof rails when the bars are stowed.
1. Pull out the crossbars from the roof rail holders by pulling up the covers.
2. Slide the bars in the direction shown in the illustration.
3. Install the bars into the holders.
4. Make sure that the latches are fitted s
BV:DTC E2 FRONT SENSOR BUS RH COMMUNICATION ERROR
NOTE:
Refer to DTC E4 for details on DTC E2. <Ref. to AB(diag)-175, DTC E4 FRONT
SENSOR BUS RH COMMUNICATION
ERROR, Diagnostic Chart with Trouble Code.>
BW:DTC E3 FRONT SENSOR BUS RH COMMUNICATION ERROR
NOTE:
Be sure to properly identify the A
© 2010-2024 Copyright www.suoutback.com