Subaru Outback manuals

Subaru Outback: Wheel alignment

*: The difference between right-hand camber and left-hand camber should be within


*: The difference between right-hand camber and left-hand camber should be within 45’ or less.

READ NEXT:

 Fuses and circuits

 Fuse panel located in the passenger compartment

 Fuse panel located in the engine compartment

A) Main fuse

SEE MORE:

 Combination meter illumination

When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence. 1. Warning lights, indicator lights, meter needles, gauge needles, odometer and trip meter back light illuminate. 2. Meter needles and gauge needle

 Front Strut

A: REMOVAL 1) Lift up the vehicle, and then remove the front wheels. 2) Remove the front strut. Place an alignment mark on the camber adjusting bolt and strut. Remove the brake hose bracket. Remove the ABS wheel speed sensor harness. Remove the two bolts securing the front axle housing t

© 2010-2024 Copyright www.suoutback.com