Subaru Outback (BR): Dimensions
READ NEXT:
Engine oil
For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-12.
NOTE
The procedure for changing the engine oil and oil filter should be perf
SEE MORE:
1. Close all windows and the moonroof (if equipped).
2. Remove the key from the ignition switch.
3. Open the doors and get out of the vehicle.
4. Make sure that the engine hood (and the trunk lid (Legacy)) are locked.
5. Close all doors (and the rear gate (Outback)).
6. Briefly press the
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bolt which secures crankshaft position
sensor to oil pump.
3) Remove the crankshaft position sensor, and disconnect
the connector from the crankshaft position
sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tig
© 2010-2024 Copyright www.suoutback.com