Checking the fluid level

WARNING

● Never let brake fluid contact your eyes because brake fluid can be harmful to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety, when performing this work, wearing eye protection is advisable.

● Brake fluid absorbs moisture from the air. Any absorbed moisture can cause a dangerous loss of braking performance.

● If the vehicle requires frequent refilling, there may be a leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer.

CAUTION

● When adding brake fluid, be careful not to allow any dirt into the reservoir.

● Never splash the brake fluid over painted surfaces or rubber parts. Alcohol contained in the brake fluid may damage them.

● Be careful not to spill brake fluid when adding it. If brake fluid touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If brake fluid gets on the exhaust pipe, be sure to wipe it off.

Check the fluid level monthly.

1) MAX level mark


1) MAX level mark
2) MIN level mark

Check the fluid level on the outside of the reservoir. If the level is below MIN, add the recommended brake fluid to MAX. Use only brake fluid from a sealed container.

    See also:

    2011 Subaru Tribeca review
    Subaru is on a roll, with recent redesigns of the Forester, Outback and Legacy earning recognition from Cars.com editors and consumers alike for their value and how competitive they are within the ...

    Screensaver (type D audio)
    If the following operations are not performed for more than 30 seconds while the audio is ON, the screensaver will be displayed. - Operate any button or dial - Shift the shift lever/select le ...

    Tire Identification Number (TIN)
    Tire Identification Number (TIN) is marked on the intended outboard sidewall. The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown of its individual elements. ...