Subaru Outback (BR): When checking or servicing in the engine compartment while the engine is running
WARNING
A running engine can be dangerous. Keep your fingers, hands, clothing, hair and
tools away from the cooling fan, belts and any other moving engine parts. Removing
rings, watches and ties is advisable.
READ NEXT:
Some clips and fender linings must be removed before replacing the air cleaner
elements or specific bulbs.
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center
portion of the clip is raise
Use a screwdriver to undo the clips on the air intake duct, then remove the air
intake duct. Refer to “Type A clips” F11-5.
SEE MORE:
CAUTION
In passive mode, the system will automatically activate the alarm but WILL NOT
automatically lock the doors. In order to lock the doors you must either lock them
as indicated in step 4 below or with the key once they have been closed. Failure
to lock the doors manually will result in
Engine oil
For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-12.
NOTE
The procedure for changing the engine oil and oil filter should be performed by a properly-trained expert. It is recommended that you have this service performed by your
© 2010-2024 Copyright www.suoutback.com