Subaru Outback (BR): If you park your vehicle in an emergency
The hazard warning flasher should be used in day or night to warn other drivers
when you have to park your vehicle under emergency conditions.
Avoid stopping on the road. It is best to safely pull off the road if a problem
occurs. The hazard warning flasher can be activated regardless of the ignition switch
position.
Turn on the hazard warning by pressing the hazard warning flasher switch. Turn
it off by pressing the switch again.
NOTE
When the hazard warning flasher is on, the turn signals do not work.
READ NEXT:
WARNING
● Never tow a trailer when the temporary spare tire is used. The temporary spare
tire is not designed to sustain the towing load. Use of the temporary spare tire
when towing can res
Your vehicle is equipped with the following maintenance tools.
● Jack
● Jack handle
● Screwdriver
● Towing hook (eye bolt) (if equipped) . Wheel nut wrench
● Electro
1) Under-floor storage compartment (Refer to “Under-floor storage compartment” F6-18.)
2) Electronic parking brake release tool 3) Jack handle
4) Spare tire
5) Tool bucket
SEE MORE:
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-160, REMOVAL, Rear Gate Trim.>
3) Remove the rear gate garnish. <Ref. to EI-164, REMOVAL, Rear Gate Garnish.>
4) Remove the rear wiper arm and rear wiper motor. <Ref. to WW-38, REMOVAL
CJ:DTC P0500 VEHICLE SPEED SENSOR "A"
1. OUTLINE OF DIAGNOSIS
Judge as NG when outside of the judgment value.
Judge NG when the received data from VDCCM&H/U is abnormal vehicle speed, and
the vehicle speed data
is impossible.
2. COMPONENT DESCRIPTION
Vehicle speed signals are taken in to the V
© 2010-2024 Copyright www.suoutback.com