Subaru Outback manuals

Subaru Outback (BR): To turn off the cruise control

There are two ways to turn off the cruise control:

● Press the “CRUISE” main switch button again.

● Turn the ignition switch to the “Acc” or “LOCK” position (but only when the vehicle is completely stopped).

READ NEXT:

 To change the cruising speed

 To increase the speed (by the “RES/ SET” switch)

Press the “RES/SET” switch to the “RES” side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and tre

 To increase the speed (by accelerator pedal)

1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Press the “RES/SET” switch to the “SET” side once. Now the desired speed is set and the vehicle will keep

SEE MORE:

 Knock Sensor

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the cover (A) and clip (B) from air intake boot assembly. 3) Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case. 4) Loosen the clamp (B) which connects the air intake boot assembly and throttle bo

 Universal Joint

A: REMOVAL 1) Adjust the tilt position of the steering column to the lowest position and lock the tilt lever. 2) Prevent the steering wheel from turning using the seat belt. 3) Remove the universal joint. Place alignment marks on universal joint. Remove the universal joint bolt and remove the

© 2010-2024 Copyright www.suoutback.com