Subaru Outback (BR): Disc brake pad wear warning indicators
Subaru Outback (BR) 2010-2015 Owners Manual / Starting and operating / Braking / Disc brake pad wear warning indicators
The disc brake pad wear warning indicators on the disc brakes give a warning noise when the brake pads are worn.
If a squeaking or scraping noise is heard from the disc brakes while braking, immediately have your vehicle inspected by the nearest SUBARU dealer.
READ NEXT:
ABS (Anti-lock Brake System)
WARNING
Always use the utmost care in driving – overconfidence because you are driving
with an ABS equipped vehicle could easily lead to a serious accident.
CAUTION
● The ABS system does
ABS system self-check
You may feel a slight shock in the brake pedal and hear the operating sound of
ABS from the engine compartment just after the vehicle is started. This is caused
by an automatic functional test of
ABS warning light
The ABS warning light illuminates when the ignition switch is turned to the “ON”
position and turns off after approximately 2 seconds.
This is an indication that the ABS system is working pro
SEE MORE:
Electronic Brake Force Distribution (EBD) system
The EBD system maximizes the effectiveness of the brakes by allowing the rear
brakes to supply a greater proportion of the braking force. It functions by adjusting
the distribution of braking force to the rear wheels in accordance with the vehicle’s
loading condition and speed.
The EBD syst
Front Vehicle Speed Sensor
A: REMOVAL
1) Remove the transmission assembly from the vehicle.
<Ref. to 5AT-37, REMOVAL, Automatic
Transmission Assembly.>
2) Disconnect the rear vehicle speed sensor connector.
NOTE:
Secure the transmission harness to the transmission
body using wire etc.
3) Remove the extension case.
© 2010-2024 Copyright www.suoutback.com
