Auto-store

Using the Auto-store function, you can automatically store 6 stations on the


Using the Auto-store function, you can automatically store 6 stations on the current waveband by pressing the A.S button for more than 2 seconds. Use Autostore to quickly find the strongest stations, for example when traveling through different reception areas.

NOTE

● When you use Auto-store, the new stations replace any stations previously stored.

● Interrupting Auto-store: If you accidentally press the A.S (Auto-store) button, you can cancel the Auto-store function before it has been completed as follows.

Switching to the other source Switching to the other band Press the A.S button Press the SCAN button Press the SEEK button Press any of the preset buttons Turn the TUNE/TRACK/CH dial Turn off the audio system Turn off the ignition switch

● When you use the Auto-store function while selecting the FM mode, even if you have selected the FM1 or FM2 station, the new stations are stored in the FM3 station.

● If it is only possible to receive less than 6 stations, the available stations are stored from preset 1 in order by frequency and the unused preset buttons are not registered to a station.

Also, the previously registered station memories of the unused preset buttons are cleared.

● If no stations can be received, the previously stored stations are not replaced.

● After pressing the A.S button, if more than 1 station is stored, the radio receives the station stored in preset 1.

● After pressing the A.S button, if no stations are stored, the radio receives the band and station that the radio received before pressing the button.

    See also:

    Fastening the seatbelt
    Never use a belt that is twisted or reversed. In an accident, this can increase the risk or severity of injury. Keep the lap belt as low as possible on your hips. In a collision, this spreads ...

    Main fuse
    Main fuse box The main fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. Check the main fuses if any electrical component fails to ...

    Compass zone adjustment
    Compass calibration zones 1. Refer to the Compass calibration zones map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the com ...