Subaru Outback (BR): Operating tips for heater and air conditioner
Subaru Outback (BR) 2010-2015 Owners Manual / Climate control / Operating tips for heater and air conditioner
- Cleaning ventilator grille
- Efficient cooling after parking in direct sunlight
- Lubrication oil circulation in the refrigerant circuit
- Checking air conditioning system before summer season
- Cooling and dehumidifying in high humidity and low temperature weather condition
- Air conditioner compressor shut-off when engine is heavily loaded
- Refrigerant for your climate control system
READ NEXT:
Cleaning ventilator grille
Always keep the front ventilator inlet grille free of snow, leaves, or other
obstructions to ensure efficient heating and defrosting. Since the condenser is
located in front of the radiator, thi
Efficient cooling after parking in direct sunlight
After parking in direct sunlight, drive with the windows open for a few minutes
to allow outside air to circulate into the heated interior. This results in quicker
cooling by the air conditioner.
Lubrication oil circulation in the refrigerant circuit
Operate the air conditioner compressor at a low engine speed (at idle or low
driving speeds) a few minutes each month during the off-season to circulate its
oil.
SEE MORE:
Front Axle
A: REMOVAL
1) Lift up the vehicle, and then remove the front wheels.
2) Remove the axle nut.
CAUTION:
Do not loosen the axle nut while the front axle is loaded. Doing so may damage
the hub bearing.
Lift the crimped section of axle nut.
Remove the axle nut using a socket wrench while depressing
N (Neutral)
This position is for restarting a stalled engine.
In this position the wheels and transmission are not locked. In this position,
the transmission is neutral; the vehicle will roll freely, even on the slightest
incline unless the parking brake or foot brake is applied. Avoid coasting with the
© 2010-2024 Copyright www.suoutback.com
