Subaru Outback (BR): For CVT models
This light illuminates when All-Wheel Drive is disengaged and the drive mechanism
is switched to Front Wheel Drive for maintenance or similar purposes. This light
flashes if the vehicle is driven with tires of different diameters fitted on its
wheels or with the air pressure excessively low in any of its tires.
READ NEXT:
The light illuminates when the ignition switch is turned to the “ON” position and turns off several seconds after the engine has started. This lighting pattern indicates that the Vehicle
CAUTION
The Vehicle Dynamics Control system provides its ABS control through the electrical
circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics
Control system
The indicator light flashes during activation of the skid suppression function
and during activation of the traction control function.
NOTE
● The light may remain illuminated for a short per
SEE MORE:
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the
compass zone setting is correct for your geographical location.
2. Press and hold the compass display button for 3 seconds until the zone selection
comes up (a number will be displaye
CZ:DTC P1152 O2 SENSOR CIRCUIT RANGE/PERFORMANCE (LOW) (BANK1
SENSOR1)
1. OUTLINE OF DIAGNOSIS
Detect that λ value remains low.
Judge as NG when lambda value is abnormal in accordance with λ value of front
oxygen (A/F) sensor and
running conditions such as vehicle speed, amount of intake
© 2010-2024 Copyright www.suoutback.com