Subaru Outback (BR): Moonroof (if equipped)
WARNING
Never let anyone’s hands, arms, head or any objects protrude from the moonroof. A person could be seriously injured if the vehicle stops suddenly or turns sharply or if the vehicle is involved in an accident. To avoid serious personal injury caused by entrapment, you must conform to the following instructions without exception.
● Before closing the moonroof, make sure that no one’s hands, arms, head or other objects will be accidentally caught in the moonroof.
● Before leaving the vehicle, always remove the key from the ignition switch for safety and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child operating the moonroof.
● Never try to check the anti-entrapment function by deliberately placing part of your body in the moonroof.
CAUTION
● Do not sit on the edge of the open moonroof.
● Do not operate the moonroof if falling snow or extremely cold conditions have caused it to freeze shut.
● The anti-entrapment function does not operate when the moonroof is being tilted down. Be sure to confirm that it is safe to do so before tilting the moonroof down.
The moonroof has both tilting and sliding functions.
The moonroof operates only when the ignition switch is in the “ON” position.
READ NEXT:
Tilting moonroof
1) Raise
2) Lower
The raising function will only operate when the moonroof is fully closed. The
lowering function will only operate when the moonroof is raised.
Press the rear side of the “UP
Sliding moonroof
1) Open
2) Close
Press the “OPEN/CLOSE” switch rearward to open the moonroof. The sun shade will
also be opened together with the moonroof. For Outback, the moonroof will stop at
a position
SEE MORE:
Battery charging, fluid level
Before starting any work near a battery, it's crucial to ensure that all sources of ignition, such as cigarettes, matches, and lighters, are completely extinguished. This precaution is vital because batteries emit a gas that is highly flammable and can lead to explosions if exposed to open flames or
Select Lever (removal, installation, disassembly, inspection)
A: REMOVAL
1) Shift the select lever to "N" range.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Remove the rear exhaust pipe.
2.5 L non-turbo model <Ref. to EX(H4SO)-9, REMOVAL, Rear Exhaust Pipe.>
3.6 L model <Ref. to EX(H6DO)-8, REMOV
