Subaru Outback (BR): To enter the passive mode
Subaru Outback (BR) 2010-2015 Owners Manual / Keys and doors / Alarm system / Passive arming / To enter the passive mode
If you wish to program the passive arming mode, have it done by your SUBARU dealer.
READ NEXT:
Arming the system
CAUTION
In passive mode, the system will automatically activate the alarm but WILL NOT
automatically lock the doors. In order to lock the doors you must either lock them
as indicated in step 4 be
Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered.
Also, the number of flashes indicates the location of unauthorized intrusion or
the severity of impact on the vehicle
Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to
the vehicle and when any of their electric wires is cut. The alarm system causes
the horn to sound and the turn signal
SEE MORE:
Extension Case
A: REMOVAL
1) Remove the transmission assembly. <Ref. to
5AT-37, REMOVAL, Automatic Transmission Assembly.>
2) Disconnect the rear vehicle speed sensor connector.
3) Remove the rear vehicle speed sensor.
4) Remove the extension case.
B: INSTALLATION
1) Attach the selected reduction driven
General Description of Wiper and Washer Systems
A: SPECIFICATION
B: COMPONENT
1. FRONT WIPER
Wiper rubber
Wiper blade ASSY
Wiper arm ASSY
Pivot cover B
Wiper link ASSY
Pivot cover C
Wiper motor assembly
Tightening torque: N*m (kgf-m, ft-lb)
T1: 6 (0.61, 4.4)
T2: 7.5 (0.76, 5.5)
T3: 22 (2.24, 16.2)
© 2010-2024 Copyright www.suoutback.com
