Subaru Outback (BR): Emergency disarming
Subaru Outback (BR) 2010-2015 Owners Manual / Keys and doors / Alarm system / Disarming the system / Emergency disarming
If you cannot disarm the system using the transmitter (i.e. the transmitter is lost, broken or the transmitter battery is too weak), you can disarm the system without using the transmitter.
The system can be disarmed if you turn the ignition switch from the “LOCK” to the “ON” position with a registered key.
READ NEXT:
Valet mode
When you choose the valet mode, the alarm system does not operate. In valet mode,
the remote transmitter is used only for locking and unlocking the doors and rear
gate (Outback) and panic activati
Passive arming
When passive arming mode has been programmed by the dealer, arming of the system
is automatically accomplished without using the remote transmitter. Note that in
this mode, DOORS MUST BE MANUALLY
To enter the passive mode
If you wish to program the passive arming mode, have it done by your SUBARU dealer.
SEE MORE:
Registering the phonebook data
1. Input the phone number to be registered. Refer to “Inputting the phone number”
F5-36.
2. Say the name to be registered.
3. “Confirm” is displayed.
4. Press the “TUNE/TRACK/CH” dial.
5. “Stored” is displayed.
6. Select “Speed Dial” by operating the “TUNE/TRACK/CH” di
CVTF
A: INSPECTION
Check for leakage of CVTF from transmission.
B: ADJUSTMENT
CAUTION:
CVTF level changes along with CVTF temperature. When inspecting CVTF
level, observe the specified
CVTF temperature.
Always use specified CVTF or equivalent. Using other fluid than
specified or equivalent will c
© 2010-2024 Copyright www.suoutback.com
