Subaru Outback manuals

Subaru Outback (BR): Locking the doors

Press the “” button to lock all doors


Press the “and rear gate (Outback). An electronic chirp will sound once and the turn signal” button to lock all doors
and rear gate (Outback). An electronic chirp will sound once and the turn signal lights will flash once.

If any of the doors (or the rear gate/trunk lid) is not fully closed, an electronic chirp will sound five times and the turn signal lights will flash five times to alert you that the doors (or the rear gate/trunk lid) are not properly closed. When you close the door, it will automatically lock and then an electronic chirp will sound once and the turn signal lights will flash once.

READ NEXT:

 Unlocking the doors

Press the “” button to unlock the driver’s door. An electronic chirp will sound twice and the turn signal lights will flash twice. To unlock all doors and the rear gate (Outback), briefly

 Unlocking the rear gate (Outback)

Pressing the “” button unlocks the rear gate. An electronic chirp will sound twice and the turn signal lights will flash twice.

 Vehicle finder function

Use this function to find your vehicle parked among many vehicles in a large parking lot. Provided you are within 30 feet (10 meters) of the vehicle, pressing the “” button three times in a 5-

SEE MORE:

 Warranties and maintenance

vehicle damage or malfunction caused by trailer towing. If you use your vehicle to tow a trailer, more frequent maintenance will be required due to the additional load. (Refer to “Maintenance schedule under severe driving conditions” in the “Warranty and Maintenance Booklet”.) Under n

 Low beam light bulbs

1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. 4. Remove the retainer spring. 5. Replace the bulb, then set the retainer spring securely.

© 2010-2024 Copyright www.suoutback.com