Subaru Outback manuals

Subaru Outback (BR): Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag will basically not deploy.

Subaru Outback (BR) 2010-2015 Owners Manual / Seat, seatbelt and SRS airbags / *SRS airbag (Supplemental Restraint System airbag) / SRS side airbag and SRS curtain airbag / Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag will basically not deploy.

1) The vehicle is involved in frontal collision with another vehicle (moving


1) The vehicle is involved in frontal collision with another vehicle (moving or stationary).

2) The vehicle is struck from behind.

3) The vehicle pitches end over end.

In the event of accidents like those illustrated, the SRS side airbag and SRS curtain airbag are basically not designed to deploy.

1) First impact


1) First impact
2) Second impact
A) SRS curtain airbag
B) SRS side airbag

In an accident where the vehicle is struck from the side more than once, the SRS side airbag and SRS curtain airbag deploy only once on the first impact.

Example: In the case of a double side impact collision, first with one vehicle and immediately followed by another from the same direction, once the SRS side airbag and SRS curtain airbag are activated on the first impact, they will not be activated on the second.

READ NEXT:

 SRS airbag system monitors

A diagnostic system continually monitors the readiness of the SRS airbag system (including front seatbelt pretensioners) while the vehicle is being driven. The SRS airbag system warning light wi

 SRS airbag system servicing

WARNING ● When discarding an airbag module or scrapping the entire vehicle damaged by a collision, consult your SUBARU dealer. ● The SRS airbag has no userserviceable parts. Do not use

 Precautions against vehicle modification

WARNING To avoid accidental activation of the system or rendering the system inoperative, which may result in serious injury, no modifications should be made to any components or wiring of the SR

SEE MORE:

 Clutch Switch

A: REMOVAL 1) Disconnect the ground cable from battery. 2) Remove the instrument panel lower cover. <Ref. to EI-64, REMOVAL, Instrument Panel Lower Cover.> 3) Disconnect the connector from clutch switch. 4) Remove the clutch switches. B: INSTALLATION 1. CLUTCH SWITCH 1) Move the clevis pin

 Hill Holder indicator light

WARNING If the Hill Holder indicator light does not illuminate even when the Hill Holder switch is pressed to activate the Hill Holder function, the electronic parking brake system may be malfunctioning. Immediately stop the vehicle in a safe location and contact your SUBARU dealer. The li

© 2010-2024 Copyright www.suoutback.com