Subaru Outback manuals

Subaru Outback (BR): Vehicle placard

The vehicle placard is affixed to the driver’s side B-pillar.


The vehicle placard is affixed to the driver’s side B-pillar.

Example:

The vehicle placard shows original tire size, recommended cold tire inflation


The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehicle weight, seating capacity and loading information.

READ NEXT:

 Measuring and adjusting air pressure to achieve proper inflation

Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pressure

 Glossary of tire terminology

● Accessory weight The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio,

SEE MORE:

 HVAC System Control Panel

A: REMOVAL 1. AUTO A/C MODEL 1) Disconnect the ground cable from battery. 2) Remove the center panel assembly. CAUTION: Do not put your finger on the fin of the air vent grille. Doing so may damage the fin. Attach the protective tape (a) to the meter visor. Insert a finger int

 Odometer

This meter displays the odometer when the ignition switch is in the “ON” position. The odometer shows the total distance that the vehicle has been driven. If you press the trip knob when the ignition switch is in the “LOCK” or “Acc” position, the odometer/trip meter will light up.

© 2010-2024 Copyright www.suoutback.com