Subaru Outback (BR): Tire labeling
Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed
on the sidewall of a tire by tire manufacturers. These marking can provide you with
useful information on the tire.
READ NEXT:
Your vehicle comes equipped with P-Metric tire size. It is important to understand
the sizing system in selecting the proper tire for your vehicles. Here is a brief
review of the tire sizing syste
Tire Identification Number (TIN) is marked on the intended outboard sidewall.
The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown
of its individual elements.
The following makings are also placed on the sidewall.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which this tire may be inflated. For example,
“350 kPa (51 PS
SEE MORE:
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside of the reservoir while the engine is
cool.
2. If the level is close to or lower than the “LOW” level mark, add coolant up to
the “FULL” level mark. If the reserve tank is empty, remove the radiator c
If the select lever cannot be operated, turn the ignition switch back to the
“ON” position then move the select lever to the “P” position with the select lever
button pressed and brake pedal depressed. If the select lever does not move after
performing the above procedure, perform the
© 2010-2024 Copyright www.suoutback.com