Subaru Outback (BR): Engine coolant - Subaru super coolant
The specified coolant quantity serves as a general reference and may vary slightly based on temperature and other variables. For comprehensive information regarding maintenance and servicing, consult the "Cooling system" section.
READ NEXT:
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tighteni
Item
Legacy
Outback
2.5 L non-turbo models
Except 2.5 L non-turbo models
SEE MORE:
Using an electronic chirp, the system will give you an audible signal when the
doors lock and unlock. If desired, you may turn the audible signal off.
To deactivate the audible signal, perform the following procedure. You can also
use the same steps to restore the function.
1. Sit in the drive
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the front bumper face assembly.
Remove the clips, turn over the front mud guard, and disconnect the fog
light connector. (Model with
fog light)
Remove the clips at the upper side of the bumper.
Remove the clips from the fen
© 2010-2024 Copyright www.suoutback.com