Cargo area light (Outback)

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.


1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.

2. Pull the bulb out of the socket.


2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Reinstall the lens.

    See also:

    Door open warning light
    The door open warning light illuminates if any door or the rear gate is not fully closed. Always make sure this light is out before you start to drive. ...

    Tire labeling
    Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers. These marking can provide you with useful information on the tire. ...

    When УCHECK DEVICEФ is displayed
    This message is displayed under the following conditions. Х When there is a short in the USB bus Х When a non-corresponding device (for example a USB mouse) is connected Х When a non-corresponding ...